---GJH Service---

PlateWriter 3600 Pro Tech Section

BrochureUpdatesManualsContactDownloadsiScreeningWhite Papers-SpecsCalibrating Your PressVideo'sTips & TricksPrint Head InfoPW3600TechPage

 


Tech Notes

 -GJ-20170101,PW3600, Service Utility     -GJ-20170105,PW3600 Improved Print Bed    -GJ-20170106, PW3600 New Flush Box

 -GJ-20170104, PW3600 Support Bracket   -GJ-20170107, PW3600 New Waste Box Set   -GJ-20170108, PW3600 Ink Absorb Pads

 -Replacing the Print Head

 

Utilities

-PW3600 Service tool IV  -Epson 3600 firmware  -Service Program

 

Manuals

 -Epson 5200 Service Manual  -Installation Manual -Maintenance Chart   -Pre-Installation  -PW3600Service Manual   -Brochure

                    

 

 

 

 

Specifications

 

PlateWriter 3600 Pro
Applications
Consumables - Liquid Dot*
Plate thickness mm (") 0.15/0.20/0.30 (0.006/0.008/0.012)
Plate types - iPlates*
Plate, length (min. - max.) mm (") 311-1140 (9.5-44.9)
Plate, width (min. - max.) mm (") 210-914 (8.3-36)
Approvals
Approvals - UL, c-UL, FCC, CE, CB
Consumption
Power, in stand-by, Finishing unit kWh (BTU/hour) 170
Dimensions/Weight
Depth mm (") 3131 (1232.5)
Footprint m (ft) 3.01 (32.35)
Height mm (") 1498 (589.7)
Height, feed, Finishing unit mm (") 435 (17.1)
Width mm (") 960 (378)
Environment
Relative humidity range % 40-80
Performance
Imaging resolution dpi 1440x1440 or 2800x2800
Imaging size, max. mm (") 909x1123 (35.8x44,2)
Imaging speed, @ max. resolution plates/hour 4:20 min. 400x511 (15.7x20.1) / 5:59 min. 550x650 (21.7x25.6) / 6:57 min. 605x745 (23.8x29.3)
Press run length (press dependent) Impressions 50000
Screening resolution lpi FM 19 micron dots. AM line screening up to 200 LPI.
Screening type - G&J FM iScreen technology, customised for inkjet CtP application or standard Harlequin AM screening
Power Supply
Power, in operate by 230 VAC (10%) per phase, Finishing unit kWh (BTU/hour) 9170
Power, in operate by 230 VAC (10%) per phase, Imaging unit kWh (BTU/hour) 240
Power, voltage (EUR), Finishing unit VAC 230, 1W + N + PE, 1 x 12 Amps, 50/60 Hz
Power, voltage (EUR), Imaging unit VAC 230, 1W + N + PE, 1 x 10 Amps, 50/60 Hz
Power, voltage (JP), Finishing unit VAC 200, 2W+PE, 2 x 10 Amps, 50/60 Hz
Power, voltage (JP), Imaging unit VAC 100, 1W+N+PE, 1 x 10 Amps, 50/60 Hz
Power, voltage (US), Finishing unit VAC 230, 2W+PE, 2x10 Amps, 50/60 Hz
Power, voltage (US), Imaging unit VAC 115, 1W+N+PE, 1x10 Amps, 50/60 Hz
Temperatures
Temperature range, FINISHER C (F) 20-24 (70-78)
Volumes
Container capacity, GUM l (US gal.) 1 (0.264)